透過電子郵件分享連結
未填寫所有必填欄位。
寄送電子郵件
contact bubble
个性化解决方案

想和我們一起開發和實現專屬解決方案?

 諮詢服務

 電子郵件

Bürkert - 在您身邊
辦公室 /1
  • 總辦事處
  • 總部
  • Systemhaus
  • 經銷商
  • 辦公室
  • 工廠
  • 物流中心
bürkert
 

Media control for the cuvette washing station

For greater efficiency

Your benefits

  • Customisable system solution
  • Compact design and combination of multiple functions
  • Chemical resistance: The best material, from EPDM to PEEK, for the medium being used

In clinical chemistry, efficient analysis devices can be supplied with the desired samples without considerable additional effort. Whith over 100 glass cuvettes in a single analysis device, regular replacement is very costly and time-consuming. A cuvette wash station increases, therefore, the efficiency of a devise significantly. To successfully use the cuvettes multiple times, they are washed and dried eliminating cross contamination. The precise control of the fluids also ensures that use of media and reagents is kept to a minimum. Bürkert develops customised system solutions to meet specific requirements and to provide greater efficiency in the analysis process.

Guaranteed residue-free cleaning for reliable results

During the cleaning process, the analysed solution is first removed from the cuvette using vacuum. It is then rinsed up to 15 times using a variety of fluids (water, detergent, acidic solution, alkali solution, second detergent, etc.) The valves switch with high precision and ensure that fluid consumption is kept to a minimum during the cleaning process. Once drying is complete, the cuvette is clean, free of residues, and can be filled with a new sample again. We handle development, production, assembly and final testing for you – so that everything goes smoothly. This guarantees a customised solution with an optimised design so that all processes run reliably and efficiently.

Media control for the cuvette washing station

Components for your reliable media control

類型 6724

2/2 或 3/2 Whisper 閥附介質分開

類型 6724
  • 最高耐化學性
  • 附 8.9 mm 結構寬度的緊湊設計
  • 標稱直徑 0.8 mm(真空達 5 bar)和1.2 mm(真空達 3 bar)
  • 極其快速、接近無聲的開關,分貝 < 20 dB(A)且功耗極小
  • 高背壓密封性、傑出沖洗性能以及 100% 占空比

類型 0127

帶有分離隔膜的兩位兩通或兩位三通翹板電磁閥

類型 0127
  • 可以滿足最高的化學耐抗性要求
  • 結構緊湊,並列間距 16 mm,Cv 值最高 0.058
  • 始於 1993 年,久經考驗,值得信賴
  • 設計靈活,滿足客戶的個性化需求
  • 背壓密封性好,良好的可沖洗性,以及 100% 持續接通

類型 6011

直動式兩位兩通柱塞閥

類型 6011
  • 直接作用式緊湊小型閥,最大公稱通徑 DN 2.4
  • 抗振型螺紋接合線圈系統
  • 簡單便捷的法蘭或連接板安裝
  • 用於軟管插接連接器的快速接頭(Push-in 配件)

類型 6628

帶有分離隔膜的兩位兩通或者兩位三通 TwinPower 翹板電磁閥

類型 6628
  • 22 mm 緊湊結構,最大公稱通徑 3.0
  • 適用於高化學耐抗性的分離隔膜
  • 作用方式 NC、NO 和 3 路通用
  • 翹板原理保證了背壓密封性
  • 具備良好的可沖洗性,而且內部空間極小

Our other solutions in different applications

Reagent and sample dosing

Analysis unit

Cleaning and waste handling

表格

聯繫銷售團隊

Burkert Hong Kong Ltd.

德國寶得香港有限公司

香港新界葵涌葵昌路18-24號

美順工業大廈11樓B室

電話: +852 2480 1202

info.hkg@burkert.com

歡迎與我們聯繫!

我的比較清單