透過電子郵件分享連結
未填寫所有必填欄位。
寄送電子郵件
contact bubble
个性化解决方案

想和我們一起開發和實現專屬解決方案?

 諮詢服務

 電子郵件

Bürkert - 在您身邊
辦公室 /1
  • 總辦事處
  • 總部
  • Systemhaus
  • 經銷商
  • 辦公室
  • 工廠
  • 物流中心
bürkert
 

Media control in electrical impedance counting

For enhanced reliability

Your benefits

  • Compact system solution enables various functions tob e combined into a single component
  • Chemical resistance and maximum quality for low maintenance intervals
  • High leak-tightness for maximum efficiency in regulating the medium

Electrical impedance measurement is an established method for detecting the number of blood cells in a sample. The reliability of the measurement results is greatly dependent on the media control system, which is responsible for regulating the supply and discharge of the electrolyte solution or sample. For this purpose, valves and pumps that work quickly and precisely are used.

Requirements to impedance counting

Impedance measurement enables the precise number and size of blood cells to be determined in a short time, which provides an indication of the patient’s state of health. This is exactly the reason why reliable measurement is so important.

Peace of mind in achieving precise results – Procedure

The electrolyte solution is pumped via a valve into the impedance measurement device, into which the blood sample is introduced. Both are then passed through a cavity, small enough to permit only one cell to pass through at a time. Using an electrical field and based on the resistance between the two measuring electrodes, the blood cells can be counted and typified, enabling not only the number of the cells but also their size to be determined. We are pleased to support you with our extensive application expertise when implementing a suitable system.

Electrical Impedance Counting

類型 6724

2/2 或 3/2 Whisper 閥附介質分開

類型 6724
  • 最高耐化學性
  • 附 8.9 mm 結構寬度的緊湊設計
  • 標稱直徑 0.8 mm(真空達 5 bar)和1.2 mm(真空達 3 bar)
  • 極其快速、接近無聲的開關,分貝 < 20 dB(A)且功耗極小
  • 高背壓密封性、傑出沖洗性能以及 100% 占空比

類型 0127

帶有分離隔膜的兩位兩通或兩位三通翹板電磁閥

類型 0127
  • 可以滿足最高的化學耐抗性要求
  • 結構緊湊,並列間距 16 mm,Cv 值最高 0.058
  • 始於 1993 年,久經考驗,值得信賴
  • 設計靈活,滿足客戶的個性化需求
  • 背壓密封性好,良好的可沖洗性,以及 100% 持續接通

類型 6624

帶有分離隔膜的兩位兩通和兩位三通 Bürkert TwinPower 翹板電磁閥

類型 6624
  • 可以滿足最高的化學耐抗性要求
  • Bürkert Twinpower 驅動裝置和 10 mm 的並列間距,造就了特別緊湊的結構
  • DN 0.8 (5bar) 和 DN 1.6 (2bar)
  • 整合式 Hit and Hold電子設備
  • 背壓密封性好,可沖洗性優異

類型 6626

帶隔離膜片的 2 位 2 通和 2 位 3 通 Bürkert TwinPower 搖臂電磁閥

類型 6626
  • 滿足最高的耐化學性
  • 排列尺寸 16mm 的 Bürkert Twinpower 驅動器帶來極其緊湊的結構
  • DN 2.0 (3bar) 和 DN 3.0 (2bar)
  • 整合的 Hit-and-Hold 電子裝置
  • 高背壓密封性,可沖洗性優異

Our other solutions in different applications

Reagent and sample dosing

Analysis unit

Cleaning and waste handling

      

表格

聯繫銷售團隊

Burkert Hong Kong Ltd.

德國寶得香港有限公司

香港新界葵涌葵昌路18-24號

美順工業大廈11樓B室

電話: +852 2480 1202

info.hkg@burkert.com

歡迎與我們聯繫!

我的比較清單